NEW USMG Original Gunner Armor Vest

Real Action Paintball is proud to introduce the USMG original Gunner Armor Vest (Large) was designed by combat veterans of Operation Iraqi Freedom to be ideal for gunners, grenadiers, and heavy assault personnel. The Gunner Armor Vest (Large) is equipped with an all-mesh interior for maximum ventilation as well as large lateral-stabilizing panels and a fully adjustable retention system.  The built-in quick cutaway system doffs the armor in the event of injury or ignition.

468 Shot By Shotgun

Real Action Paintball is proud to make our new 468 as real as it gets...and as tough as nails. To give you the most authentic mil-sim experience possible, we designed the magazine-fed 468 to have the exact look, feel, balance, and ergonomics of an M4 carbine. To create the most reliable marker available, we build the 468 to survive extended real-world use...and extreme torture tests.

Like being shot with a full-power load from a 12 gauge shotgun...then being loaded with paint and fired until the mag runs dry without a single misfire. Without a single chop. And without a hiccup.

When you slide into position under withering fire, wrap your finger on the 468's trigger, and prepare to lean out into the maelstrom, you need absolute confidence that when you pull that trigger your 468 will go bang...and that the ball you send downrange will leave the barrel intact, fly true, and arrive precisely where you need it to go. That means you need the accuracy of the Recon Rifled Barrels that come standard on the 468; you need the reliability of our magazine-feed system, which pushes each paintball into the chamber and holds it there until the bolt closes cleanly; and you need the tough-as-nails reliability that will make that marker work each time, every time, no matter how hard you play.

No matter how badly it gets knocked around.

No matter what your theater of operations dishes out...even if it takes a direct shot from a 12 gauge.

One marker is tough enough to survive this abuse, and enable our military and police customers to train like they're going to fight: the 468. RAP4 is proud to prove its industry-leading toughness by throwing the 468 from a moving car, running it over with an SUV, shooting it with a shotgun, strapping one to an airborne operator and kicking him out of a high-flying plane...all in the name of proving beyond doubt that the 468 is ready for tactical operations that are truly as real as it gets.

Real Action Paintball - As Real as it Gets!

NEW MKP Mag Kit - Made In USA Series

RAP4 is proud to announce the new and improved MKP-II Magazine Conversion Kit for Tippmann X7 Phenom markers! Now you can easily upgrade your Tippmann X7 Phenom to accept interchangeable spring-powered magazines...while retaining the reliability, accuracy, rate of fire, and electro/mechanical function that makes your Phenom awesome in the first place!

Installing the MKP-II Magazine Conversion Kit is the only way your X7 Phenom will be able to compete in mag-fed tactical games!

The beauty of the redesigned MKP-II is in its clamshell construction, which replaces the upper receiver on your Phenom. In minutes you can remove the bolt and other internal parts of your Phenom and transfer them into the MKP-II's magazine-fed body. By utilizing those internal parts and your Phenom's lower receiver, your marker retains its ability to function electronically or mechanically - everything you love about your Phenom - while gaining the tactical advantage of drawing your paint supply from interchangeable, spring-powered magazines!

Reload your MKP-II just like operators in combat theaters do - with interchangeable magazines. Run silently, as the paintballs are held under spring pressure to ensure they won't rattle...and pull that trigger confidently whether on the run or lined up for a one-shot elimination, with the absolute confidence that the spring-powered magazine will have a ball completely seated in the chamber every time you need one. That gives you the anti-chop reliability of a force-feed hopper without a hopper's noise, weight, or obstruction of your field of vision. Try an MKP-II, and you'll also notice the improved balance and handling...and how that balance, handling, and natural point of aim are exactly the same as a duty-issue M4 carbine.

With the MKP-II, your marker will have the most intense real-world style at the field. We redesigned the MKP-II to further lighten its already light weight, and enhance its fit, function, and aesthetics. The MKP-II looks like the receiver on a 416 combat-issue rifle, and offers the incredible functionality of a full-receiver-length Picatinny/RIS rail. Attach your choice of optics or other accessories right to the receiver to achieve the custom load-out you need to get the job done...

...while your marker looks the part of a duty-issue carbine. You also have the pride of knowing that each new MKP-II Magazine Conversion Kit is made in the USA!

Upgrade your Tippmann X7 Phenom with the MKP-II, and you'll be set to dominate the field in mag-fed paintball with the most realistic, exciting, and reliable marker in paintball.

Real Action Paintball - As Real as it Gets!

468 RAN OVER BY SUV TEST

Real Action Paintball is proud to present the 468 as the industry's toughest marker...and to prove it, we've released a series of videos detailing our 468 torture tests. We know the 468 is tough enough to withstand years of intense use, but we want to prove it to the world. That's why we've tested it thoroughly in real-world situations, and invented these torture tests to test the 468's outer limits.

How would it survive being thrown from a moving vehicle...and then run over? Lead designer Omar Macy famously straddled a 468 across two blocks and stood on it, without any part failing in any way. But we wanted to see if the 468 could withstand a little automotive mayhem.

Not only did the marker survive the initial fall, but it survived being run over by multiple tires at normal driving speed. To make sure the internals were fine, and the 468 would be ready to dominate your foes immediately after that kind of abuse, he loaded it with a full magazine and pulled the trigger...

...eleven times, shooting eleven paintballs just as accurately as ever. Watch his muzzle in the video - no splooge, just a little burst of road dust from the barrel and air from the onboard 13ci HPA tank concealed in the multi-position collapsible stock.

We build the 468 tough enough to survive our torture tests because we want you to have absolute confidence in your marker every time you line up on an opponent; every time you send a ball downrange; every time you put your game on the line to make that perfect shot.

And we build the 468 to exactly reproduce the look, feel, controls, and ergonomics of the M4/M16 family of battle rifles, so that your playing experience is truly as real as it gets. Our police and military customers train with our markers because they exactly replicate the experience of training with their combat arms, enabling them to hone the practical and tactical skills in training that will keep them alive in the action. In other words, they choose our 468 so that they can train like they're going to fight!

Now you can play with this same gear...and see exactly why they trust the durability, accuracy, and utter reliability of RAP4's 468. 468 [Made in USA]

Real Action Paintball - As Real as it Gets!

468 Airborne Operation

Real Action Paintball wants you to train like you're going to fight with our new 468, the most intense paintball marker available! We just took an operator up in a plane, strapped a 468 across his chest, and kicked him out the door over Southern California. He popped his chute and landed with precision, his 468 ready for battle.

Designed to replicate the look, feel, ergonomics, and operation of an M4 carbine, we also built our new 468 to be true to the M4's battle-hardened toughness. We regularly put production models through grueling field tests to ensure that they're tough as nails, accurate as lasers, and ready for anything, so that you can confidently train - or play - under intense real-world combat conditions with absolute faith in your 468. They've survived being dropped, buried in sand, thrown from moving vehicles, run over by SUVs...and of course, strapped to our airborne operator as he fell through the sky.

...and you'll notice how the 468 is visually indistinguishable from the M4 carbine. That's because our 468 uses a magazine-fed action, collapsible stocks just like on battle-issue rifles, and forearms that provide the same RIS accessory attachment points as military issue arms. That spring-powered magazine even holds your paint in the chamber under constant spring pressure for positive feeding from any angle...which also prevents chopping. Go ahead and fire it as fast as you like, with absolute confidence.

The 468 is a flattop twin of the M4, with a mil-spec accessory rail running the length of the receiver and connecting to the accessory rail atop the forearm. Three more accessory rails on the forearm allow you to attach lights and lasers, NVG gear and even grenade launchers! You can outfit your 468 for CQB, build the ultimate sniper platform, or strike a happy medium with just those accessories you absolutely need to carry.

Then you can outfit a second 468 upper receiver for a different style of mil-sim paintball, and when you need to adapt to the mission, you can swap out upper receivers...at the push of the two body pins that secure the two-piece receiver - just like a military-issue M4 weapon platform!

Gear-up with the new 468, and train like you're going to fight. Even if that means an airborne insertion into your next scenario, you'll have the absolute confidence that comes with carrying the 468!

Real Action Paintball - As Real as it Gets!

NEW Gunner Armor Machine Gunner Package

Introducing the Gunner Armor Machine Gunner Vest Package is designed to replicate soft body armor vests while offering full MOLLE utility...and it comes standard with an assortment of pouches that will keep you in the fight all day long!

This vest package is designed for players who use the RAP4 Box Magazine, or play with old school hoppers instead of modern paintball magazines, so they can carry four full-size paintball tubes at the ready...and arrange them on the vest right where they want them! The MOLLE attachment points let you put those pouches where you like them to spread the weight evenly around; you can put them upside down or right side up according to your preference, and attach the Combat Lifesaver Pouch right where you want it so it can carry your medical kit or serve as a dump pouch for spare magazines.

You'll even stay hydrated all day long thanks to the Camel Pack hydration system that attaches conveniently to the back of the Gunner Armor Machine Gunner Vest...and is covered with more MOLLE attachment loops so you can add even more pod pouches or other pouches to adapt this vest to changing mission requirements.

When you need to carry the most paint possible, in a comfortable and ergonomic way, the Gunner Armor Machine Gunner Vest Package lets you get into the action with everything you need right there at the ready.

FREE 468 Custom Engraving

 

Real Action Paintball is proud to announce a creative new way to customize your dramatic new 468. Now with the 468 Trade Up Program - the only way to get a 468 for the next few months - you can have your new 468 custom engraved with your name, team name, or slogan...absolutely free. Teams can even have their logo engraved right on the receiver with qualifying orders!

The only way to acquire the amazing new 468 is to avail yourself of the 468 Trade Up Program, where you send us your RAP4 marker - any T68, of any size, and any generation - and we'll use its finest parts in building your custom 468. Keep your accessories at home, but upon receipt of your otherwise complete 468, we'll use your barrel, stock, and other choice parts to create a 468 with our brand new, industry-leading, mag-fed 468 receiver.

The 468 empowers you with the easy interchangeability of our pin-secured, two-part receiver that perfectly recreates the utility of the M16/M4's receiver. Set up your 468 to perfectly suit your style, and keep a second complete upper receiver ready and customized for different mission challenges. Then when it's time to adapt from CQB to a sniping or other role, you can completely change your 468 just by slipping out two receiver pins and swapping on your other upper receiver.

It's that easy to completely overhaul your marker in the field, without tools, to adapt to evolving conditions and varying missions.

The 468 is the most authentic M4/M16-inspired marker on the market, perfectly replicating the look, feels, ergonomics, and even the natural point of aim of military-issue arms. The magazine feed ensures that rounds are seated - and held - securely in the chamber at all times, without the �battle rattle� of an unrealistic hopper...and so that each shot is ready for chop-free shooting the instant you need it. No more paint halfway in the chamber; no more dry firing when you need the first shot to count. The 468 delivers on each shot...every time.

And now, you can further customize your 468 with custom engraving right on the magazine well. Make it truly yours by having Real Action Paintball engrave your name, your team name, your slogan, or other text right on the receiver. Choose from four fonts, let us know what you want, and we'll make it happen.

Teams can even have their team logo engraved on their markers with any Trade Up Program trade of ten or more markers. Your opponents will fear the reliability, accuracy, and combat-effectiveness of your new 468...and you can give them even more to envy with this custom engraving!

Best of all: the engraving is free with your trade in...and so is the shipping for sending your complete 468 back to you! Just place and pay for your order with the Trade Up Program, ship us your marker, tell us what you want on the receiver, and we'll take care of - and pay for - building your 468, engraving it, and shipping it to you.

Real Action Paintball - As Real as it Gets!

MKP-II Magazine Conversion Kit For Tippmann X7 Phenom

   

Real Action Paintball is proud to announce a bold new version of the hugely successful MKP-II Mag Fed Conversion Kit - one that comes"in the white," without any finish applied at the factory, enabling you to create the custom finish of your dreams from the ground-up. Use simple firearm refinishing kits like those from DuraCote and other trustworthy manufacturers - or durable paint designed for outdoor applications on metallic surfaces - and you can upgrade this gleaming silver receiver with a truly custom camo pattern, design, or solid color finish.

The choices are limitless, and the power is yours.

The MKP-II Mag Fed Conversion Kit is designed to replace the receiver of your existing marker, incorporating its internal parts to create a dedicated mag-fed marker. This gives you the most authentic look, feel, balance, and natural point of aim possible...while opening up your field of vision by eliminating that bulky, noisy hopper. The spring-fed magazines are easily swapped for fast reloads, and each one holds your paint under constant spring pressure so you have a ball completely seated in the chamber at all times. This eliminates chopping and ensures that when you pull that trigger for the perfect shot, a ball is right there ready to go...no matter what angle you hold the marker, or whether you're perfectly still or charging over rugged terrain.

Players around the world have discovered the excitement of mag-fed paintball, which creates the most realistic mil-sim experience possible - from the aesthetics of the markers to the realistic round counts in the interchangeable magazines and the focus that technology puts back on tactics, teamwork, and marksmanship. It's a revolutionary way to play...but you have to have a mag-fed marker, like you can build from your existing marker with the MKP-II Mag Fed Conversion Kits.

When you want the ultimate in customizability, you need to upgrade with this MKP-II Mag Fed Conversion Kit (Aluminum Base). While these conversion kits are available for a wide range of models from Tippmann, BT, US Army, and other brands, this Aluminum Base model in the white is presently available for the Tippmann X7 Phenom. Want one for a different model? Check out our website at www.rap4.com and see if we have one available. If not, drop us a line, and we'll see what we can do for you - that's custom. That's service. That's Real Action Paintball.

Real Action Paintball - As Real as it Gets!